Cleaning a Jetted Tub: A Guide

Bathroom renovations are a great way to add value to your home while creating a calming, restful escape from everyday life. There are plenty of ideas out there that can inspire a successful bathroom renovation. Creating a spa-like atmosphere in your bathroom using a jetted tub will add to the luxurious feel of your living space, making bathroom remodeling (whether done by Roanoke home improvement companies or on your own) a rewarding endeavor!

A jetted tub is a piece of plumbing hardware with a bathtub on top of it. There are different kinds of jetted tubs. Some have a shower in the bathtub, and others don’t. The ones that don’t usually have an overhead shower system. In some cases, the service providers will install a shower system but leave out the bathroom drain. This can cause a lot of problems, from water damage to mold forming. Though a reputed and experienced professional wouldn’t generally leave this loophole, in case they do, it would be prudent that you contact a drainage contractor similar to Hydroscapes in your area to get it fixed.

It is an enclosed, heated bathing solution that can be used for a wide variety of applications. The name comes from the idea of using jets of water directed at the body to improve the water and air temperature and help alleviate the body’s natural cooling and heating functions while also stimulating water circulation.

This is a bath designed to provide a relaxing experience in which the water jets travel from side to side instead of up and down. The jets typically create a whirlpool effect, which aids in muscle relaxation and relieves tension, both of which are important for relaxation. Also, the jets are generally more powerful than a regular bathtub, which means the bath is less likely to drain.

Jetted tubs are a popular choice for anyone who wants a place to relax and take a dip while still enjoying a warm bath. However, these need to be maintained on a timely basis with the help of a plumbing company. Apart from repairs and maintenance, they can be messy, dirty, and smelly, and if you don’t clean them regularly, they can accumulate mold and mildew, which means that they can potentially start to smell like a bathroom. Have you ever attempted to clean a jetted tub? It’s a chore.

Cleaning a jetted tub can be a daunting task, but it does not have to be as hard as you might think. This guide is intended to help you with the time-consuming and often confusing process of cleaning your tub.

Here’s a step-by-step:

  1. First of all, you should always remember to wipe away all the visible debris that you see. You can use either a sponge or microfiber cloth and make sure that it is a little damp; wipe away all the hair and visible debris from the corners and the inside of your jetted tub.
  1. After you wipe your jetted tub, the next thing that you should do is to fill the place with how water. Get enough water to fill the tub by about two inches.
  1. Once enough water is added to the jetted tub, it is time to add the cleaning agents. You should add powdered or liquid dishwasher detergent and make sure that you add two tablespoons of it.

If you don’t have that kind of dishwasher, you can also use tablets. As with tablets, always dissolve one of them in a cup of hot water before you add it to the jetted tub.

After adding to your dishwasher, you need to add two cups of distilled white vinegar, and if you don’t have that available, half a cup of chlorine is a good option.

  1. When you have added the needed cleaning agents, it is time to turn on the jets, which is optional, of course, since some manufacturers instruct to leave them open, but if they don’t, you should turn off the air-induction valves from the jets.

This will help the water and cleaning solution to provide deeper cleaning to your jetted tub. You should also set the jets to high for a maximum of 15 minutes. During this time, you’ll be able to see debris from internal plumbing.

  1. Once you’re done with the jets, turn them off and then drain your tub. Wipe away all the debris that’s on the tub. In case the water doesn’t pass away quickly, there might be a chance that the pipes are clogged. It would be imperative then to get your drain cleared using a DIY or maybe contacting a plumber.
  1. Next, you will need to refill with lukewarm or cold water just several inches above your tub’s jets. Then turn on the jets once more with the air induction valves available and put it on high for 15 minutes max, and drain.
  1. After, grab baking soda and add one cup of it into a small bowl and get an old toothbrush. Start brushing the interior surfaces of the jets.
  1. Then you can start cleaning the air-intake cover with the baking soda and remember to rinse and replace it.
  1. You then will start to clean the interior of the tub. Baking soda will also be good for cleaning.
  1. Once you are done, rinse and dry your jetted tub, and then there you have it! A clean jetted tub. Jetted tubs are a popular choice for anyone who wants a place to relax and take a dip in a while still enjoying a warm bath. However, they can be messy, dirty, and smelly, and if you don’t clean them regularly, they can accumulate mold and mildew, which means that they can potentially start to smell like a bathroom.

Leave a Comment

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.